Connecting the PGND Cable
1
1
Connect the small terminal (M4) of the PGND cable
1
Connect the small terminal (M4) of the PGND cable
to the grounding terminal of the device.
If the workbench does not have an independent grounding term
grounding point of the power supply is properly grounded.
Connecting the Power Cable
C
onnecting the DC Power Cable
Connecting the Power Cable
The M4 terminal of the DC power supply should be connected t
power supply of the user.
1
3
2
3
4
5
Connecting the AC Power Cable
1
1
2
6
2
2
Connect the big terminal (M6) of the PGND cable to the
2
Connect the big terminal (M6) of the PGND cable to the
grounding terminal of the cabinet or workbench.
minal for connecting the PGND cable, make sure that the
to the power supply module, and the M6 terminal to the DC
Make sure that the power supply module is powered off
and the power switch on the power supply module to be
and the power switch on the power supply module to be
connected with power cable is moved to OFF (O).
Use a screwdriver to fix the RTN terminal (black) of the DC
power cable to the RTN (+) of the power supply, and the
NEG terminal (blue) to the NEG (-) of the power supply.
Install the baffle over the DC power socket.
Connect the other end of the DC power cable to the power
Disengage the baffle from the DC power socket.
Insert the AC power cable into the power socket and
supply with an output voltage in the range of –48 to –60 VDC.
p
p
fasten the AC power cable with the jack for cable-
retention clip.
Insert the three-pin plug of the AC power cable into the
power supply with an output voltage in the range of 100 to
240 VAC.
6