12
RST Button
7.2
Operation
Function
Hold down the
button for 3s to 10s.
If the
Communication using expired certificate
function is disabled for the
SmartLogger and the digital certificate of the SmartModule becomes invalid,
after enabling the function, press the RST button for 3s to 10s to enable the
SmartModule to enter the mode of ignoring digital certificate expiration and
restore the communication with the SmartLogger. The alarm/maintenance
indicator (ALM) blinks red slowly.
After the digital certificate of the SmartModule is reloaded through the
SmartLogger, the SmartModule communication can recover.
Hold down the
button for more
than 60s.
Within 3 minutes after the SmartModule is powered on after power-off, hold
down the RST button for more than 60s to restart the SmartModule and
restore factory settings.
Replacing the SmartLogger2000 with the SmartLogger3000
7.3
For details, see
Quick Guide to Replacing the SmartLogger2000 with the SmartLogger3000
. You can
scan the QR code below to obtain the document.
