8
2.3.1
Operation:
1) Connect the interfaces of the splitter with other devices by
using a telephone line:
z
LINE interface --> telephone jack on the wall
z
MODEM interface --> ADSL interface of the MT880
z
PHONE interface --> telephone
2) Connect the Ethernet interface of the MT880 with the
Ethernet interface of the computer by using a straight through
cable.
3) Connect the MT880 to a power socket by using the provided
power adapter.
4) Press
the
Power
button of the MT880 to power on the
MT880.
5) Check the Power indicator on the front panel of the MT880.
If it is on, the MT880 is powered on.
2.3 Setting Up the Configuration Environment
You can configure the MT880 through the Web setup page. This
chapter describes how to set up the configuration environment of the
MT880.
Planning the Parameters
Before setting up the configuration environment, plan the following
parameters.
