BGND, and PGND cables have the insulation sheath. Hence, you only need to write "AC" and
the cabinet number on each label.
The labels for AC power cables are attached to one side of the identification plate on the cable
tie.
describes the meaning of the label for the AC power cable.
Table A-15
Meaning of the label for the AC power cable
Content
Meaning
MN-AC
MN: Cabinet number or the power socket position. Power socket: Mark the
positions clearly to avoid confusion. If the sockets have multiple rows and
columns, identify their positions as the cabinet.
The label only indicates the location of the peer end or socket. Information about the local end
is not required. Ensure that the labels are attached in the correct direction. After the cable ties
are bundled onto the cable, the identification plates with the labels must point upward, as shown
in
Figure A-61
Example of the labels on the AC power cable
Label on the loaded cabinet side
(position of the cable on the power
distribution cabinet side)
Label on the power distribution
cabinet side (position of the cable
on the loaded cabinet side)
TO:
A01 AC
TO:
B01 AC
l
On the loaded cabinet side, the label marked as "A01-AC" indicates that the cable is routed
from the power socket in row A and column 01.
l
On the power distribution cabinet side, the label marked as "B01-AC" indicates that the
cable is routed from the loaded cabinet in row B and column 01.
A.4 Fault Tag
This is the fault tag provided for the repair or the part replacement.
*Customer's Name:
Address:
Contact person:
SmartAX MA5612 Multi-service Access Module
Maintenance Guide
A Appendix
Issue 01 (2012-07-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
311
