Huawei S Series Скачать руководство пользователя страница 36

Страница: 36 / 74

d. Configure IP addresses for egress router interfaces.

Configure an IP address for the interface connecting to the intranet.

system-view

[

HUAWEI

] sysname Router

[Router] interface GigabitEthernet 0/0/1

[Router-GigabitEthernet0/0/1]

ip address 172.16.1.2 24

//Configure an IP

address for the interface connecting to CORE1.

[Router-GigabitEthernet0/0/1]

quit

[Router]

interface GigabitEthernet 0/0/2

[Router-GigabitEthernet0/0/2]

ip address 172.16.2.2 24

//Configure an IP

address for the interface connecting to CORE2.

[Router-GigabitEthernet0/0/2] quit

Configure an IP address for the interface connecting to the Internet.

[Router]

interface GigabitEthernet 0/0/0

[Router-GigabitEthernet0/0/0]

ip address 1.1.1.2 30

//Configure an IP

address for the interface connecting to the Internet.

[Router-GigabitEthernet0/0/0]

quit

e. (Optional) Configure a static route.

Configure a default static route to the egress router and a backup static route on CORE1
and CORE2, respectively.

[CORE1]

ip route-static 0.0.0.0 0.0.0.0 172.16.1.2

//Configure a default static route to the egress router on CORE1.

[CORE1]

ip route-static 0.0.0.0 0.0.0.0 172.16.3.2 preference 70

//Configure a backup static route to CORE2 on CORE1.

[CORE2]

ip route-static 0.0.0.0 0.0.0.0 172.16.2.2

[CORE2]

ip route-static 0.0.0.0 0.0.0.0 172.16.3.1 preference 70

On the egress router, configure a default static route to the carrier device.

[Router]

ip route-static 0.0.0.0 0.0.0.0 1.1.1.1

On the egress router, configure primary and backup routes. The next hop of the
primary route is CORE1 and that of the backup route is CORE2.

[Router]

ip route-static 192.168.10.0 255.255.255.0 172.16.1.1

[Router]

ip route-static 192.168.10.0 255.255.255.0 172.16.2.1 preference

//Configure a backup route to department A with the next hop pointing

to CORE2.

[Router]

ip route-static 192.168.20.0 255.255.255.0 172.16.1.1

[Router]

ip route-static 192.168.20.0 255.255.255.0 172.16.2.1 preference

//Configure a backup route to department B with the next hop pointing

to CORE2.

If a dynamic routing protocol is configured, skip this step.

Содержание S Series











































































Результаты поиска

Содержание S Series

Отзывы:

Huawei S Series, Быстрая настройка, Страница: 36 / 74

Результаты поиска

Содержание S Series

Отзывы: