Huawei RRU3262 Скачать руководство пользователя страница 9

Страница: 9 / 130

Changes in RRU3262 Installation Guide

This section describes the changes in the RRU3262 Installation Guide.

01 (2014-11-20)

This is the first official release.

Compared with draft C (2014-11-10), this issue does not include any new information.

Compared with draft C (2014-11-10), this issue does not includes any change.

Compared with draft C (2014-11-10), no information is deleted from this issue.

Draft C (2014-11-10)

This is a draft.

Compared with Draft B (2014-10-24), this issue includes the following change:

Topic

Change Description

9.11 Installing an RRU Power Cable

Modified the precautions in the background
information.

12.1 Adding a Tool-Less Female
Connector (Pressfit Type) to the RRU
Power Cable on the RRU Side

Added the precaution that do not reversely
connect the positive and negative poles in the
procedure.

Compared with Draft B (2014-10-24), this issue does not include any new information and no
information is deleted from this issue.

Draft B (2014-10-24)

This is a draft.

Compared with Draft A (2014-09-30), this issue includes the following change:

RRU3262
Installation Guide

1 Changes in RRU3262 Installation Guide

Issue 01 (2014-11-20)

Huawei Proprietary and Confidential

Содержание RRU3262



































































































































Результаты поиска

Содержание RRU3262

Отзывы:

Huawei RRU3262, Руководство по установке, Страница: 9 / 130

Результаты поиска

Содержание RRU3262

Отзывы: