Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-45
Example
# Set the peer dead interval on the interface Vlan-interface 10 to 80 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] ospf timer dead 80
3.1.41 ospf timer hello
Syntax
ospf timer hello
seconds
undo ospf timer hello
View
Interface view
Parameter
seconds
: Interval, in seconds, at which an interface transmits hello packet. It ranges
from 1 to 255.
Description
Use the
ospf timer hello
command to configure the interval for transmitting Hello
messages on an interface.
Use the
undo ospf timer hello
command to restore the interval to the default value.
By default, the interval is 10 seconds for an interface of
p2p
or
broadcast
type to
transmit Hello messages, and 30 seconds for an interface of
p2mp
or
nbma
type.
Related command:
ospf timer dead
.
Example
# Configure the interval of transmitting Hello messages on the interface Vlan-interface
10 to 20 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] ospf timer hello 20
3.1.42 ospf timer poll
Syntax
ospf timer poll
seconds