Command Manual - DLDP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DLDP Configuration Commands
Huawei Technologies Proprietary
1-3
Example
# Enable DLDP globally on all optical ports of the switch.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dldp enable
All fiber ports except fabric ports have enabled DLDP!
1.1.3 dldp authentication-mode
Syntax
dldp authentication-mode
{
none
|
simple
simple-password
|
md5
md5-password
}
undo dldp authentication-mode
View
System view
Parameter
none
: Performs no authentication with the peer port.
simple
: Sets the authentication mode with the peer port to plain text.
simple-password
: Simple text authentication password, which is a string in plain text
consisting of 1 to 16 characters.
md5
: Sets the authentication mode with the peer port to MD5.
md5-password
: Authentication password with the peer port, which is a string in plain
text consisting of 1 to 16 characters, or the text correspond to the plain text.
Description
Use the
dldp authentication-mode
command to set the DLDP authentication mode
and password for the ports of the local and peer devices.
Use the
undo dldp authentication-mode
to cancel the DLDP authentication mode
and password for the ports of the local and peer devices.
By default, authentication mode is
none
.
Note that:
When you configure the DLDP authentication mode and authentication password,
make sure the same DLDP authentication mode and password are set for the ports of
the local and peer devices, which are connected with the optical fiber cable or copper
twisted pair. Otherwise, DLDP authentication fails. DLDP cannot work when DLDP
authentication fails.