Command Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Port Basic Configuration
Commands
Huawei Technologies Proprietary
1-13
- broadcasts, - multicasts, - pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
(The following displayed information is omitted)
Table 1-4
Description on the fields of the
display unit
command
Field
Description
Aux1/0/0
Description : Aux Interface
The description string of the AUX port is "Aux
Interface".
For the description of other fields, refer to Table 1-2.
1.1.11 duplex
Syntax
duplex
{
auto
|
full
|
half
}
undo duplex
View
Ethernet port view
Parameter
auto
: Sets the port to auto-negotiation mode.
full
: Sets the port to full duplex mode.
half
: Sets the port to half duplex mode.
Description
Use the
duplex
command to set the duplex mode of the current port.
Use the
undo duplex
command to restore the default duplex mode, that is,
auto-negotiation.
By default, the port is in auto-negotiation mode.
Related command:
speed
.
Example
# Set the Ethernet1/0/1 port to auto-negotiation mode.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet 1/0/1