manualshive.com logo in svg

Huawei Quidway AR 28 Series, Руководство по установке, Страница: 83 / 97

Поделиться
Скачать
Huawei Quidway AR 28 Series Скачать руководство пользователя страница 83

Quidway AR 28 Series Routers  Installation Manual 

Chapter 6  Router Maintenance

 

Huawei Technologies Proprietary 

6-10

 

  Backuping Boot ROM program to FLASH successed! 

Step 3: When Boot ROM Download Menu appears again, select <5> to and reboot the 
router.  

2)  Restore the extended segment of the Boot ROM image from Flash memory 

In case faults occur to the extended segment or the upgrade is done inadvertent, take 
these steps to restore the extended segment of the Boot ROM image from Flash 
memory to the Boot ROM: 

Step 1: Enter Boot Menu, select <9> to enter Boot ROM Download Menu. 

Step 2: In Boot ROM Download Menu, select <3> to restore the extended segment 
from Flash memory.  

Restore Extended Segment, are you sure?[Y/N] 

Enter <Y>. The system starts restoring and if successful displays: 

  Writing to Boot ROM.Please wait...###### 

  Restoring Boot ROM program successed! 

Step 3: When Boot ROM Download Menu appears again, select <5> to exit and reboot 
the router. 

IV. Upgrading the application image through Ethernet 

Upgrading the application image through Ethernet (or with NET as described in Boot 
Menu) is to download using an Ethernet interface. In this approach, the router is TFTP 
or FTP Client and needs connecting to TFTP or FTP Server using a particular Ethernet 
interface. On the AR 28-09/28-10/28-11/28-12/28-13/28-14/28-30/28-31, this interface 
must be Ethernet 0/0, the first fixed Ethernet interface. On the AR 28-40/28-80, this 
interface is the first detected Ethernet interface, for example, Ethernet 1/0, the first 
Ethernet interface in SLOT 1 in case no Ethernet interface module is installed in SLOT 
0. 

 

  Caution:  

No TFTP/FTP Server is available with the AR 28 series. You must install one yourself. 

 

1)  Start TFTP or FTP Server on the PC connected to the Ethernet interface on the 

router and set the path for getting the source file. Given FTP Server, you need to 
set user name and password in addition. 

2)  In Boot Menu, select <2> to enter Net Port Download Menu as follows: 

Net Port Download Menu: 

1:  Change Net Parameter  

2:  Download From Net 

Содержание Quidway AR 28 Series


































































































Отзывы:

Нет отзывов