Huawei PLC CCO01A Скачать руководство пользователя страница 7

Страница: 7 / 44

PLC CCO01A
User Manual

1 Safety Precautions

Issue 02 (2016-01-10)

Huawei Proprietary and Confidential

Safety Precautions

Personnel Requirements



Only qualified and trained electrical technicians are allowed to install and operate the
PLC CCO.



Operators should understand the components and functioning of a grid-tied PV power
system, and they should be familiar with relevant local standards.

Label Protection

Do not remove or damage the bar code and label on the PLC CCO because they contain
important product information.

Installation

Read this document before installation. Huawei shall not be liable for any consequence
caused by violation of the regulations specified in this document.



Before installation and cable connections of the PLC CCO, ensure that the PLC CCO is
not connected to a power supply and is not powered on.



Before connecting cables, ensure that the switch to be connected to the PLC CCO AC
power cable is off.



Install the PLC CCO in an environment with good ventilation to ensure efficient and
long-term system performance.



Ensure that the PLC CCO is free from strong electromagnetic interference.



Ensure that the PLC CCO is away from heat sources.



Ensure that the PLC CCO air exhaust vents are free from blockage.

Operation

Содержание PLC CCO01A













































Результаты поиска

Содержание PLC CCO01A

Отзывы:

Похожие инструкции для PLC CCO01A

Бренды по названию

Популярные бренды

Huawei PLC CCO01A, Руководство пользователя

Результаты поиска

Содержание PLC CCO01A

Отзывы:

Похожие инструкции для PLC CCO01A

Бренды по названию

Популярные бренды