To avoid damaging the equipment, exercise
caution when removing the packing materials.
Removing the Packing Materials
3.2
1. Move the PDC to the specified installation
position using a pallet truck.
2. Cut off and remove the binding straps, as
shown in the figure.
3. Remove the packing materials and foam.
4. Remove the plastic bag, take out the fitting box,
and put it aside.
4
PDC Installation
Moving the PDC
The PDC is heavy. Take protective measures during movement to prevent personal injury.
Move the cabinet with caution to avoid bumping or toppling, which may damage the equipment.
NOTICE
NOTICE
3
1. Move the PDC to the
specified installation
position.
2. Remove the bolts
from the pallet under
the PDC, as shown
by (1) in the figure.
3. It is recommended
that six people work
together to move the
PDC away from the
pallet, as shown by (2)
and (3) in the figure.
4. Adjust the PDC
leveling feet using a
wrench to ensure that
all castors touch the
ground.
1. (Optional) Check whether the tiltwatch indicator on the carton has turned red. If yes, record the
information and contact the equipment carrier and the local Huawei office immediately.
2. Visually inspect the equipment appearance to check whether the equipment is paint-peeling,
deformed, scratched, or soaked. If yes, record the information and contact the equipment carrier
and the local Huawei office immediately.
3. Check the equipment and fittings against the packing list, and ensure that the equipment and
fittings are correct and complete. If any fitting is missing or does not comply with the model in
the packing list, record the information and contact the local Huawei office immediately.
