background image

1.

Run the command 

adduser

 

-u

 

name

 

-l

 

level

 to set the user name and the user level, and

then press 

Enter

.

2.

The system displays "Input the PassWord." Type the password, and then press 

Enter

.

3.

The system displays "Input the PassWord, again." Type the password again, and then press

Enter

.

Example

Add a user. The user name is 

user1

, and the user level is 

guest

.

OceanStor: admin> adduser -u user1 -l 3
Input the password:
Input the password again:

8.2 User Deleting Command

User deleting command is used to delete user.

8.2.1 deleteuser

8.2.1 deleteuser

Function

The command 

deleteuser

 is used to delete a user.

Format

deleteuser

 

-u

 

name

Parameters

Keyword and Value

Description

Default Value

-u name

The user name.

None.

 

Modes

Normal mode.

Level

Super administrator level.

Usage Guidelines

When using this command, note the following items:

OceanStor S2600 Storage System
Command Reference

8 User Management Commands

Issue 07 (2010-05-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

8-3

Содержание OceanStor S2600



















































































































































































































































































Отзывы: