Home Phone
Services Guide
GETTING STARTED
USING YOUR NET10 WIRElESS PHONE
ABOUT NET10 WIRElESS SERVICE
1
3
2
Use the
ACTIVATION CARD
First.
ACTIVATION CARD
IMPORTANT START HERE!
1. Assemble your Home Phone unit and connect to a power supply.
2. Connect a telephone device to the Home Phone unit.
3. Activate your Service at NET10HomePhone.com or call
1-800-299-7280 (Use your Serial Number below).
4. Dial *22890 to program your phone.
PREPARE YOUR NET10 WIRELESS HOME PHONE DEVICE FOR ACTIVATION
Remove Protectors and Assemble Your Device
1
Remove all protectors from the device by peeling them off. Carefully
insert the battery connection cable into the battery port. The connector
will click into place when properly inserted. Then, place the battery in its
compartment and replace the back cover.
Connect the Device to a Power Supply
Find your Serial Number and Activate your Service
Hear Your Phone Number
3
5
6
Install the Antenna Properly
Connect a Telephone to the Home Phone Device
2
4
Insert one end of the power adapter into the DC input port then plug
the other end into an electrical outlet. The device will turn ON
automatically. If it does not turn on, press the
Power
button located
on the top of the device. You know your device is
ON
when the Power
indicator lights up blue.
With the device turned off, align the antenna and antenna port then
screw the antenna into the port. Ensure that the antenna is securely
tightened all the way in (this can take over 20 turns) and that it points
upward once fully tightened.
To Activate your service, go to NET10HomePhone.com or call
1-800-299-7280 from another phone. You will need the Serial Number
located on the front of this card and a NET10 Wireless Home Phone
Service Plan or a credit or debit card to complete your Activation.
After completing the Activation, you MUST dial *22890 from the
telephone device connected to the NET10 Wireless Home Phone
device to program it.
Listen for programming-related messages/
instructions. You will receive a confirmation message once the
programming is complete.
After Activation is complete,
wait 2 minutes
then call 1-855-343-2255 to
hear your phone number.
If this is the first call made from the device, you will be asked to
choose your language for Voicemail functions before you can
complete your call.
BOTH
telephone ports on the device connect to the same telephone
number. Plug one end of a telephone cable into a telephone port and the
other end into the back of a corded telephone or a cordless telephone
base device.
Telephone device and telephone cable are not included.
You will need the Serial Number below to Activate your phone.
®
ACARD-NTH226C
For help identifying the device’s ports and indicators, refer to the
Services Guide included in your package.
®
®
Questions? Visit NET10HomePhone.com
or call 1-800-299-7280
QUAG-NTH226C
SEE ACTUAl CARD IN
YOUR PACKAGE
FOR YOUR SERIAl NUMBER
