background image

Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.

 

No  part  of  this  document  may  be  reproduced  or  transmitted  in  any  form  or  by  any  means  without  prior 
written consent of Huawei Technologies Co., Ltd. 

 

Trademarks and Permissions

 

  and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. 

All  other  trademarks  and  trade  names  mentioned  in  this  document  are  the  property  of  their  respective 
holders. 

 

Notice

 

The purchased products, services and features are stipulated by the contract made between Huawei and 
the  customer.  All  or  part  of  the  products,  services  and  features  described  in  this  document  may  not  be 
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, 
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or 
representations of any kind, either express or implied. 

The  information  in  this  document  is  subject  to change  without notice. Every  effort  has  been  made  in  the 
preparation  of  this  document  to  ensure  accuracy  of  the  contents,  but  all  statements,  information,  and 
recommendations in this document do not constitute a warranty of any kind, express or implied. 

 

 

 

 

Huawei Technologies Co., Ltd. 

Address: 

Huawei Industrial Base 

Bantian, Longgang 

Shenzhen 518129 

People's Republic of China 

Website: 

http://www.huawei.com

 

Email: 

[email protected]

 

 

 

 

 

 

 

Содержание NE08E-S6












Отзывы: