Huawei MU739 Скачать руководство пользователя

Страница: 76 / 89

HUAWEI MU739 HSPA+ LGA Module

Hardware Guide

Certifications

Issue 01 (2011-08-24)

Huawei Proprietary and Confidential

−

The laptop manufacturer should test antennas of the laptops if the antenna

gain of the laptop is higher than that used in the certification test of Huawei

modules.



The laptop manufacturer should test the compliance of the laptops with EMC and

safety specifications.



The SAR of the laptops needs to be tested only if the antennas of the laptops are

within 20cm of people.

IC Certification

Huawei applies for IC certificate to the relevant certification bodies by using an IC test

report converted from the FCC test report.

NCC Certification

Huawei mails a sample module to the ADT of Taiwan. The ADT then performs relevant

tests and issues an NCC certificate.

7.5 GCF and PTCRB

Conformance test and declaration are required for establishing that the GSM and

WCDMA terminals to be sold in a region meet the requirements of the local carriers

and networks.

Global Certification Forum (GCF) and PTCRB certifications are recognized in most

regions all around the world. Most operators all round the world accept either

certification as one of the market entry conditions.

7.5.1

GCF Certification

The GCF is an active partnership between European mobile device manufacturers

and mobile network operators.

According to the R&TTE Directive 1999/95/EC issued in 2001, authorized test

organizations or manufacturers should perform final conformance tests of GSM

terminals in compliance with the GCF certification criteria (GCF-CC). Manufacturers

then should prepare a DOC and take all responsibilities for quality of the equipment.

The GCF officially launched the 3G WCDMA certification program in February 2005.

The GCF plays an important role in protocol and application conformance testing. The

GCF provides harmonized standards for conformance tests and defines a test system

approved by all members to ensure that the terminals meet network deployment

requirements. All GCF members approve the terminals if the terminals are certified by

the GCF. The GCF certifies both test cases and test systems. The GCF certification

originates in Europe and now is accepted by mainstream operators in both Europe

and Asia.

The GCF certification is a DOC of equipment manufacturers. Equipment

manufacturers only need to perform the test items defined by the GCF and then

submit a DOC on the GCF website. All GCF members can view the desired DOC on

the GCF website.

draft2

Содержание MU739


























































































Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды

Huawei MU739, Руководство по оборудованию

Результаты поиска

Содержание MU739

Отзывы:

Похожие инструкции для MU739

Бренды по названию

Популярные бренды