7.2 Set Calibration Parameters
The device is equipped with calibration parameter by default when it is delivered out of
factory, please refer to manual calibration described in the chapter below when the effect of
default config is not good.
Step 1
Choose
Setup > Event > Smart Track > Smart Track
.
The
Smart Track
tab page is displayed, as shown in
Figure 7-2
Smart Track tab page
Step 2
Select the lens number under the video image successively (as shown in
), and then
you can add calibration point for video image of corresponding lens.
Figure 7-3
Selecting a lens ID
1.
Click
and click video image to display calibration box, drag the calibration box to
proper location.
IPC6091-P360
Quick Start Guide
7 Smart Track Setup
Issue 01 (2019-02-22)
Copyright © Huawei Technologies Co., Ltd.
20
