7
Smart Track Setup
After enabling alarm track and setting calibration parameters, the tracking PTZ dome will
auto activate to corresponding position and track the object until it is beyond the monitoring
range when the intelligent rules of panoramic camera trigger alarm.
Precondition
The panoramic camera has set the intelligent rules of intrusion or tripwire.
7.2 Set Calibration Parameters
7.1 Enable Alarm Track
Alarm track is disabled by default; smart track is valid only after alarm track is enabled.
Step 1
Choose
Setup > Event > Smart Track > Alarm Track
.
The
Alarm Track
tab page is displayed, as shown in
Figure 7-1
Alarm Track tab page
Step 2
Click the slider to enable
Alarm Track
.
----End
IPC6091-P360
Quick Start Guide
7 Smart Track Setup
Issue 01 (2019-02-22)
Copyright © Huawei Technologies Co., Ltd.
19
