IPC1601&2602&5602&5603
User Guide
3 Hardware Installation
Issue 12 (2014-06-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
In this manual, the way to use the camera is not recommended for auto focus lens, because
this method used base on RS485 which it is complicated to connect for camera to work. So
there are only two ways installation description in the manual, including auto aperture lens
with manual focus and manual aperture lens with manual focus.
3.2.1 Installing an Auto Aperture and Manual focus Lens
Before installing a lens, remove the front protection cap from the camera first.
Figure 3-1 shows how to install an auto aperture and manual focus lens.
Figure 3-1
Installing an auto aperture and manual focus lens
Step 1
Attach the lens to the camera body and turn the lens clockwise until it locks into place.
Step 2
Insert the cable plug of the lens into the IRIS port on the side of the camera body.
Step 3
After adjust focus, lock the Tele/wide and focus pullers mounted on the lens
----End
3.2.2 Installing a Manual Aperture and Manual focus Lens
Installing a C-Mount Manual Aperture and Manual focus Lens
Before installing a lens, remove the front protection cap from the camera first. Need to use
C/CS adapter ring when connect to the C mount lens.
Step 1
Use the Phillips screwdriver to loosen the screw on the side of the focusing ring.
Turn the focusing ring counterclockwise to extend it for several millimeters and manually
bring the camera into focus.
The camera has been calibrated before delivery. You can also adjust the focusing ring as required to
obtain the required focus.
Step 2
Tighten the screw using the Phillips screwdriver to secure the focusing ring.
Step 3
Install the C/CS mount adapter to the camera.
Step 4
Attach the lens to the camera body and turn the lens clockwise until it locks into place.
