18
Indicator
Status
Description
Blinking
Data is being transmitted through the Ethernet
interface.
Solid on
The Ethernet connection is set up.
LAN
Off
The Ethernet connection is not set up.
Blinking
z
The wireless network function is enabled.
z
Data is being transmitted through the WLAN.
Solid on
z
The wireless network function is enabled.
z
No data is being transmitted through the WLAN.
WLAN
Off
The wireless network function is disabled.
7.2
Interfaces and Buttons
Interface or
Button
Description
POWER
It is used to connect the power adapter.
LAN
It is used to connect to the Ethernet interface on the computer.
RESET
You can press and hold the RESET button for over six seconds
to restore the default settings of the HG523.
Note: After you restore the default settings, your customized
data is lost. Therefore, use this function with caution.
ADSL
It is used to connect to the MODEM interface on the splitter.
It is the power switch and is used to power on or power off the
HG523.
7.3
Default Settings
Parameter
Setting
IP address of the LAN interface
192.168.1.1
Subnet mask of the LAN interface
255.255.255.0
User name used for logging in to the Web-based
configuration utility
admin