Figure 2-3
Installation positions of the G530 V2 and GP316 modules
NOTE
l
A maximum of two G530 V2 compute modules can be installed in a chassis, and each G530 V2
combines with the GP316 in its upper slot to form a G530 V2 compute node. The two combinations
are independent of each other. When configuring only one compute node, select the combination
(G530 V2-1 and GP316-1) on the left.
l
In each combination, the G530 V2 and GP316 must be installed and removed in the following
sequence: Install the GP316 and then the G530 V2. Remove the G530 V2 and then the GP316.
l
Maintaining one combination does not affect the proper operation of the other combination.
Front Panel
shows the front panel of the G530 V2.
Figure 2-4
Front panel of the G530 V2
1
Label plate
2
USB 3.0 ports
3
Power button/indicator
4
UID button/indicator
5
HLY indicator
6
Release button
7
M.2 module adapter
8
M.2 module
9
Ejector lever
10
2.5-inch hard disk
Huawei G5500 Server G530 V2 Compute Node
White Paper
2 About the G530 V2 and GP316
Issue 03 (2018-02-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5