Huawei FusionPower6000 Скачать руководство пользователя

Страница: 32 / 63

–

Ports and tools for standard software, hardware, operating system, and

database management systems, providing excellent openness, flexibility,

compatibility, and portability.

–

Upstream and downstream integration ports which comply with open

standards and the Modbus, SNMP, and TCP/IP protocols for bottom-layer

device access; various communications protocols and interfaces for

interconnection with third-party systems.

–

The NetEco provides basic and optional network management functions,

such as asset management, capacity management, alarm management,

configuration management, energy efficiency management, security

management, system management, and iPower intelligent management.

▪

Temperature prediction: In the power transformation and distribution

system of the PowerPOD, there are many high-voltage and low-

voltage electrical contacts. As the device runtime increases, the

contact surface is corroded or loose due to moisture, dust, or

vibration. As a result, the contact temperature increases abnormally,

affecting the safety of power supply to the data center. Based on the

temperature rise model and the measured current, ambient

temperature, and contact temperature, the system infers the

reasonable temperature of the contacts and realizes the predictive

maintenance of the contact temperature. The following scenarios are

supported: hot-swappable terminal temperature prediction for

connection points between low-voltage cabinets and copper bar,

connection points between feeder cabinets and copper bars, feeder

cabinet switches, dense busway connector boxes, small busway

power distribution units, integrated PDUs, and precision PDUs in

power modules.

▪

ABB circuit breaker switch setting: In the low-voltage power

distribution system of the PowerPOD, the correctness of the rated

current of the switches and level-3 setting protection parameters is

crucial to the power safety of the data center. However, the circuit

breaker switch setting is associated with upstream and downstream

power distribution. Currently, the setting is difficult and error-prone

and heavily relies on expert experience. The NetEco collects the

current parameters of circuit breakers and UPSs through the ECC800-

Pro, determines the circuit breaker parameters based on the

upstream and downstream relationships of the devices, short-circuit

current algorithm, and low-voltage switch setting value matching

algorithm, and determines whether to implement selective

protection for the low-voltage switch.

▪

ABB circuit breaker health prediction: The NetEco predicts the health

status of circuit breakers by using the Ekip Com collection module of

the NetEco to collect telemetry data (such as the switching-on/off

status, alarm, and operating current) of circuit breakers,

configuration data (such as the operating environment of circuit

breakers), and circuit breaker O&M plan data, reducing unnecessary

maintenance. When a circuit breaker works or is not maintained for

a long time, the system reminds the customer to maintain the circuit

breaker in a timely manner.

FusionPower6000

Product Description

4 Product Overview

Issue 02 (2021-06-30)

Содержание FusionPower6000
































































Результаты поиска

Содержание FusionPower6000

Отзывы:

Похожие инструкции для FusionPower6000

Бренды по названию

Популярные бренды

Huawei FusionPower6000, Описание продукта

Результаты поиска

Содержание FusionPower6000

Отзывы:

Похожие инструкции для FusionPower6000

Бренды по названию

Популярные бренды