eSpace IAD208E(M) Integrated Access Device
Quick Start
4
Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
4
Manual Configuration (Web)
About This Chapter
The IAD provides users with the Web management system. The system runs the
customer page in the Internet Explorer. The page is easy-to-use, reliable, and visual for
users. The chapter describes how to configure about typical scenes and advanced
parameters in the Web mode. In addition, some titles are marked with (SIP) or (MGCP)
to indicate that these service configurations can be implemented over SIP or MGCP.
4.1 Logging In to the Web Management System
The IAD208E(M) supports data configuration and maintenance management in Web
mode.
4.2 IAD (SIP) Accessing the NGN/IP PBX Network
Users of the IAD208E(M) register with the SoftSwitch to implement the voice service.
After configuring the data on the SoftSwitch, configure the data on the IAD208E(M).
Then the IAD208E(M) can register with the SIP server to implement the voice service.
4.3 IAD (MGCP) Accessing the NGN/IP PBX Network
Users of the IAD208E(M) register with the NGN/IP PBX to implement the voice
service. After configuring data on the SoftSwitch, configure data on the IAD208E(M)
to implement the voice service.
4.4 IAD (SIP) Connecting to the IMS
Users of the IAD208E(M) register with the IMS to implement the voice service. After
configuring data in the IMS, configure data on the IAD208E(M) to implement the
voice service.
4.5 Setting UCEMS Parameters
On the IAD, you can set basic parameters for the communication with the Unified
Communication Element Management System (UCEMS) so that the IAD can be
managed by the UCEMS.
4.6 Accessing Network Through the IAD
A PC can use the switch function of an IAD to access the network.
4.1 Logging In to the Web Management System
The IAD208E(M) supports data configuration and maintenance management in Web
mode.
