eSpace IAD
Troubleshooting
3 Co mmon Troubleshooting Methods
Issue 02 (2012-02-29)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
78
Figure 3-9
Capturing packets by means of the Hub
Capturing packets by using the mirror port on the IAD208E(M), IAD132E( T), and
IAD1224
Connect the PC that is used to capture packets to the IAD. The netw orking scheme is shown
in
Figure 3-10
Capturing packets by using the mirror port on the IAD
Configure the mirror port on the IADs by running the
TERMI NAL(lanswitch)#monitor
source-port
observing-port
destination-port
command.
describes the parameters in the command.
For example:
TERMINAL(lanswitch)#monitor 1 observing-port 2
Monitor lsw interface succeed
After configuring the port, port 2 can capture packets of port 1.