Table A-61
Sub_OpCode
Sub_OpCode
Description
0x170000h
SMART information (including information defined
by the protocol and vendor) and protocol error logs.
A.6.1.2.2 Configuring the SSD Capacity
This command is used to configure the available capacity of the entire SSD.
Table A-62
Sub_OpCode
Sub_OpCode
Description
0xA00000h
Configure the SSD capacity.
This command uses the Dword13 and Dword14 fields. Enter reserved value 0 for fields that
are not involved.
If the configured capacity is not aligned by 4 KB, the value is rounded up for alignment.
Table A-63
Dword13&Dword14
Bit
Description
63:00
Capacity of the entire SSD (unit: byte)
A.6.1.2.3 Recovering Data
This command is used to try to recover the SSD from error status or restore data in error
status. This command uses the Dword12 and Dword13 fields. Enter reserved value 0 for other
fields that are not involved.
Table A-64
Sub_OpCode
Sub_OpCode
Description
0x230000h
Recover data.
ES3000 V5 NVMe PCIe SSD
User Guide
A Supported NVMe Commands
Issue 07 (2019-03-19)
Copyright © Huawei Technologies Co., Ltd.
184