l
sanitize
: device clea-up
l
hotplug
: orderly hot-swap
l
atomicwrite
: atomic write (This command is supported by ES3000 V5 2151 or later. For
details about how to query the firmware version of an SSD, see
NOTE
Target devices are SSDs (SSD controllers) and logical drives. The
-d
subcommand is used to specify the
target device. For example,
nvme0
indicates a PCIe SSD, and
nvme0n1
indicates a logical drive.
Currently only the
info
and
format
commands support both SSDs and logical drives. Other commands
support only SSDs (if
nvme0n1
is entered, it is regarded as
nvme0
.)
Operation Logs
All setting operations performed on the ES3000 by using the hioadm tool are recorded. The
log file location is as follows:
l
For Linux,
/opt/hio/operationLogs/operations.log
.
l
For Windows,
.\operationLogs\operations.log
in the installation directory.
l
For ESXi,
/scratch/hio/operationLogs/operations.log
.
If the log file size exceeds 4 MB, the file is automatically backed up as an
operations.log.old
file, overwriting the existing
operations.log.old
file.
The log file content includes the command start time, remote client IP address, user name,
command, command output time, and operation result.
The operation result is one of the following:
l
SUCCEEDED:
The command was successfully executed.
l
FAILED
: The command failed to be executed.
l
CANCELED
: The command was canceled because the user selected
No
when asked for
conformation.
l
KILLED
: The command was stopped abnormally. For example, the user performed a
Ctrl
+
C
operation, closed the client, killed the process, or restarted the OS.
The following is an operation log in Linux:
[2016-01-27 17:37:10] [[email protected]] [hioadm updatefw -d nvme0 -s 3 -a 1]
[17:37:15] [SUCCEEDED].
6.2 Querying, Upgrading, and Activating Firmware
6.3 Querying and Setting the Capacity
6.5 Safely Erasing User Data of an SSD
6.6 Querying and Setting the Power Consumption Level
6.8 Querying and Setting Temperature Thresholds
6.9 Querying and Setting the Write Mode
ES3000 V5 NVMe PCIe SSD
User Guide
6 Command Description
Issue 07 (2019-03-19)
Copyright © Huawei Technologies Co., Ltd.
101