Huawei ePico3801 Скачать руководство пользователя | Manualshive

Страница: 15 / 75

background image

2

Introduction to the ePico3801

About This Chapter

The ePico3801 is a pico base station used as the radio access device in the uBro solution to
enhance indoor coverage. Being one of a series of ePico products developed according to the
FDD protocols in 3GPP R99/R4/R5/R6, the ePico3801 provides indoor users with improved
radio access services. By enhancing ordinary indoor coverage, intensive coverage in office
buildings, and hot-spot indoor coverage, the ePico3801 eliminates indoor dead zones and shares
the load on the macro network.

2.1 Position of the ePico3801 on the Network of the uBro Solution

The ePico3801 is used as the radio access device in the uBro solution.

2.2 Features of the ePico3801

The ePcio3801 is an enhanced pico base station used for indoor coverage. It uses IP access and
supports HSPA. With the ePico3801, network planning and optimization are convenient, and
security is high. The ePico3801 makes it possible to deploy flexible and seamless UMTS network
coverage quickly.

2.3 Composition of the ePico3801

The ePico3801 consists of the ePico3801 body and the power adapter. The ePico3801 body
provides the LEDs, reset button, power port, and FE port. The ePico3801 supports the AC power
supply and Power over Ethernet (PoE) power supply, which require different power adapters.

2.4 Specifications of the ePico3801

The specifications of the ePico3801 involve its performance specifications, physical and
electrical specifications.

2.5 Application Scenarios

The ePico3801 is widely used for indoor coverage in small and medium enterprises (SMEs),
SOHOs, schools, and office buildings and for hot-spot indoor coverage at pubs, airports, stores,
and hotels.

ePico3801
User Guide

2 Introduction to the ePico3801

Issue 01 (2009–09–23)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

2-1

«
...
13
14
15
16
17
...
»

Содержание ePico3801












































































Отзывы:

Нет отзывов

Похожие инструкции для ePico3801

Бренд: Ubee Страницы: 114

Бренд: Ubee Страницы: 105

Бренд: Ubee Страницы: 96

Бренд: Ubee Страницы: 96

WAGO 750-8212/000-100

Бренд: Viessmann Страницы: 36

Бренд: THOMSON Страницы: 110

Бренд: Gree Страницы: 12

SURFBOARD SBG1000

Бренд: Motorola Страницы: 8

SURFBOARD SBG1000

Бренд: Motorola Страницы: 16

Бренд: Motorola Страницы: 9

SURFboard SVG7782

Бренд: Motorola Страницы: 40

SURFBOARD SBG1000

Бренд: Motorola Страницы: 2

VT2442 - VONAGE

Бренд: Motorola Страницы: 12

Бренд: Motorola Страницы: 2

Бренд: Motorola Страницы: 15

Бренд: Motorola Страницы: 2

Бренд: Motorola Страницы: 84

SURFboard 574823-001-a

Бренд: Motorola Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды