manualshive.com logo in svg

Huawei ePico3801, Руководство пользователя

Поделиться
Скачать
Huawei ePico3801 Скачать руководство пользователя страница 19

2.3 Composition of the ePico3801

The ePico3801 consists of the ePico3801 body and the power adapter. The ePico3801 body
provides the LEDs, reset button, power port, and FE port. The ePico3801 supports the AC power
supply and Power over Ethernet (PoE) power supply, which require different power adapters.

2.3.1 ePico3801 Body

The ePico3801 body consists of the ePico board, RF subboard, and plastic case. The ePico board
is responsible for the main control of the system and the processing of baseband signals. In
addition, the ePico board provides power supply for the RF unit and controls communication.
The RF subboard receives, transmits, and processes RF signals.

2.3.2 Power Adapter

The ePico3801 can use the AC power supply or power supply from the PoE function. When the
AC power supply is used, the PoE power supply system is shut down automatically. When the
AC power supply is used, the ePico3801 needs to be configured with the AC/DC power adapter.
When the PoE power supply is used, the ePico3801 needs to be configured with the power supply
equipment (PSE).

2.3.1 ePico3801 Body

The ePico3801 body consists of the ePico board, RF subboard, and plastic case. The ePico board
is responsible for the main control of the system and the processing of baseband signals. In
addition, the ePico board provides power supply for the RF unit and controls communication.
The RF subboard receives, transmits, and processes RF signals.

Exterior of the ePico3801

The ePico3801 takes the shape of a case. It contains a built-in RF subsystem, baseband
subsystem, transmission subsystem, control subsystem, and clock subsystem. The ePico3801
boasts a lower power consumption, compact structure, light weight, small size, and stylish
appearance.

The ePico3801 can be configured with an internal or external antenna, depending on the actual
requirements. 

Figure 2-2

 shows two ePico3801s, one with a built-in antenna and the other with

an external antenna.

ePico3801
User Guide

2 Introduction to the ePico3801

Issue 01 (2009–09–23)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

2-5

Содержание ePico3801












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды