background image

Safety Precaution 

The antenna(s) used for this transmitter must be installed to provide a separation 

distance of at least 20cm from all persons. 

Hereby, Huawei Technologies Co., Ltd., declares that this device is in compliance with 

the essential requirements and other relevant provisions of Directive 1999/5/EC. The 

declaration of conformity may be consulted at www.huaweidevice.com/certification. 

0678

 

France

: Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz. 

Italy

: For private use, a general authorisation is required if WAS/RLAN’s are used 

outside own premises. For public use, a general authorisation is required. 

Luxembourg

: General authorisation required for network and service supply. 

Norway

: This subsection does not apply for the geographical area within a radius of 20 

km from the centre of Ny-Ålesund. 

FCC Statement 

Federal Communications Commission (FCC) Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and 
on. The user is encouraged to try to correct the interference by one of the following 
measures: 
Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver. 
Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 
Consult the dealer or an experienced radio/TV technician for help. 

Содержание EchoLife HG532a




























Отзывы: