19
Indicator
Status
Description
Blinking
This indicator has three blinking modes that indicate
three states.
z
The indicator periodically blinks and is on for 0.2s
and off for 0.1s, which indicates that the WPS
function is activated and that a wireless terminal
can connect to the HG532a.
z
The indicator periodically blinks and is on for 0.1s
and off for 0.1s, which indicates that a wireless
terminal fails to connect to the HG532a.
z
The indicator is on for 0.1s and then off for 0.1s.
After this process repeats for four times, the
indicator is off for 0.5s. Then, the indicator blinks
as the preceding process, which indicates a wireless
terminal is setting up a connection to the HG532a.
Solid on
A wireless terminal is connected to the HG532a
through the WPS protocol. This state lasts 300s.
WPS
Off
The HG532a does not perform the WPS negotiating
operation, or the WPS functional module is faulty.
Blinking
Data is being transmitted through the Ethernet
interface.
Solid on
The Ethernet connection is set up.
LAN1–LAN4
Off
The Ethernet connection is not set up.
7.2
Interfaces and Buttons
Interface or
Button
Description
POWER
It is used to connect the power adapter.
LAN1–LAN4
It is used to connect to the Ethernet interface on the computer.
RESET
You can press and hold the RESET button for over six seconds to
restore the default settings of the HG532a.
Note: After you restore the default settings, your customized data
is lost. Therefore, use this function with caution.
ADSL
It is used to connect to the MODEM interface on the splitter.
