HUAWEI
11
6
The EC321 Manager GUI
Description
Accessing the EC321 Manager GUI
1.
To start the program, double-click the shortcut icon
of the EC321 Manager on
the desktop.
2.
If you are prompted to enter the Personal Identification Number (PIN) code, enter the
correct one and click
OK
.
You can try three times to enter your PIN code. If you failed to do that after three
times, your UIM card would be locked. If this happens, use the PIN Unblocking Key
(PUK) code to unlock it.
You can try 10 times to enter your PUK code. If you failed to do that after 10 times,
your UIM card cannot be used. If this happens, contact your network operator.
3.
When you failed to enter the PIN code or the PUK code, you can click
Cancel
to
skip over the authentication of the PIN code. Then, the functions related to the UIM
card such as connecting to the Internet, making and answering calls, sending and
receiving text messages, and reading the messages recorded in the UIM card are not
available for you. However, you can still make emergency calls.
The PIN code and the PUK code are provided by your operator. For information
about how to modify and enable/disable your PIN code, refer to "PIN Code
Management."
Exiting the EC321 Manager
Select
File
>
Exit
and you can perform the following operations:
y
Select
Quit application
to exit the EC321 Manager.
y
Select
Shut down device
to exit the EC321 Manager and stop the data card. If you
want to re-access the network service, plug and insert the device again.
