eA380 Series LTE CPE
User Guide
6 Maintenance
Issue 01 (2017-08-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
49
Prerequisites
The network deployment is complete.
The installation of the eA380 is complete.
The eA380 starts appropriately based on default parameters after power-on.
Procedure
When the LTE CPE fails to access the Internet, run the
Ping
function to quickly check
the network connection status.
3.
Start the IE browser, enter
https://192.168.1.1
in the address bar, and press
Enter
. Log
in to the Web management page, and enter
User name
and
Password
.
Use Internet Explorer 9 (IE9) or a later version.
4.
Choose
Settings > TR-069 Management>
Diagnosis
to open the
Diagnosis
page.
5.
Set
Diagnosis
Method
to
Ping
.
6.
Enter the domain name in the
Destination IP address/domain name
box.
7.
Click
Apply
.
8.
Wait until the operation is performed. The command output is displayed in the
Result
box.
Timeout
indicates the timeout period of each reply, and ranges from 1 to 10 seconds.
When the LTE CPE does not run properly, the
System Check
can be used to
preliminarily identify the problem.
Start the IE browser, enter
https://192.168.1.1
in the address bar, and press
Enter
. Then
enter the correct password and click
Log In
.
Use Internet Explorer 9 (IE9) or a later version.
9.
Choose
Settings > TR-069 Management>
Diagnosis
to open the
Diagnosis
page.
10.
Set
Diagnosis Method
to
System Check
.
11.
Click
Check
.
12.
Wait until the system check is performed. Click
Export
to export the detailed
information to the computer. If necessary, send the detailed information to maintenance
personnel.
----End
