1
Use the screws to fix the wall mount to the wall.
使用螺钉将壁装支架固定到墙壁上。
2
4
Device Installation/ 设备安装
C. Wall-mounted Installation/ 壁装
Place the mount in the desired installation position. Use a marker to mark
the screw locations. Use an 8 mm drill bit to drill the holes to a depth of
about 42 mm. Use a hammer to carefully drive the white plastic expansion
tubes into the holes.
将支架放置于安装位置 , 使用记号笔绘制螺钉安装位置，选择直径为 8mm 的钻头，
钻取深约 42mm 的导孔。 使用羊角锤将白色膨胀管打入钻好的孔内。
3
Unfasten the screws on the universal joint so that it can rotate freely.
Attach the housing to the universal joint and re-tighten the screws.
拧松万向节上的螺钉，使得万向节可以自由转动。将摄像机固定到万向节上，拧
紧万向节上的所有螺钉。
D. Pole-mounted Installation/ 立杆抱装
1
Fix the wall mount to the pole mount.
将壁装支架安装到抱装支架上。
2
Use hose clamps to fix the pole mount to the pole.
使用喉箍将抱装支架安装到柱杆上。
3
Unfasten the screws on the universal joint so that it can rotate freely.
Attach the housing to the universal joint and re-tighten the screws.
拧松万向节上的螺钉，使得万向节可以自由转动。将摄像机固定到万向节上，
拧紧万向节上的螺钉。
