manualshive.com logo in svg

Huawei BBU3900, Описание аппаратуры

Поделиться
Скачать
Huawei BBU3900 Скачать руководство пользователя страница 44

LEDs

The FAN unit has one LED, indicating the running status of the module. 

Table 3-12

 describes

the LED on the FAN unit and its status.

Table 3-12

 LED on the FAN unit and its status

Label

Color

Status

Description

STATE

Green

On for 0.125s and off
for 0.125s

The module is not
registered, and no
alarm is reported.

On for 1s and off for
1s

The module is
running properly.

Red

Off

No alarm is reported.

On for 1s and off for
1s

The module is
reporting alarms.

 

3.2.5 UPEU

The Universal Power and Environment Interface Unit (UPEU) is a mandatory board of the
BBU3900. It converts -48 V or +24 V DC power to +12 V DC power.

Panels

The UPEU is classified into the Universal Power and Environment Interface Unit Type A
(UPEUA) and the Universal Power and Environment Interface Unit Type B (UPEUB). The
UPEUA converts -48 V DC power to +12 V DC power and the UPEUB co24 V DC
power to +12 V DC power. 

Figure 3-12

 shows the UPEUA panel and 

Figure 3-13

 shows the

UPEUB panel.

Figure 3-12

 Panel of the UPEUA

(1) Power switch of the BBU

 

3 BBU3900 Equipment

BBU3900

Hardware Description

3-14

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 11 (2010-11-10)

Содержание BBU3900









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды