WLAN Settings
19
4
Advanced
Set
tings
key to pass the authentication or choose
No
ENCRYPTION
to skip the authentication.
•
Shared
: Shared key authentication. It can use only
WEP
. The user accessing the WLAN must use the
WEP
to authenticate.
◆
Configuring the Encryption Mode
• Encryption modes:
No ENCRYPTION
,
WPA-PSK
,
WPA2-PSK
,
WPA-PSK|WPA2-PSK
and
WEP
.
• For details, refer to "
".
Configuring the MAC Filter
Click
to access the
WLAN MAC Filter
page.You can control and manage the clients
accessing the WLAN, and improve the WLAN
security performance.
◆
MAC Restrict Mode
The following table shows the MAC address filter
modes:
◆
MAC Addresses
• Enter MAC addresses in the list. The device can
perform the access control over the clients whose MAC
addresses are in the list.
WLAN Bridge
Click
to access the
WLAN Bridge
page.
•
Preamble Type
: It has two options:
Long
and
Short.
In
the case that the client (PC) supports the
Short
type,
the WLAN can have a better performance if it is
Short
.
•
MAX Associations Limit
: It refers to the maximum
number of connections. It is used to set the maximum
number of concurrent WLAN users on the device.
Parameter Description
Disabled
The MAC address filter function is
disabled.
Allow
The clients with addresses in the
MAC
Addresses
list are allowed to connect
with the device through the WLAN.
Deny
The clients with addresses in the
MAC
Addresses
list are not allowed to
connect with the device through the
WLAN.
Parameter Description