manualshive.com logo in svg

Huawei B222s, Руководство пользователя, Страница: 137 / 259

Поделиться
Скачать
Huawei B222s Скачать руководство пользователя страница 137

 Chapter 15 VoIP

B222s User’s Guide

137

After successful registration, the SIP server knows that the users (identified by their dedicated SIP 
URIs) are represented by the UA, and knows the IP address to which the SIP requests and 
responses should be sent.

Registration is initiated by the User Agent Client (UAC) running in the VoIP gateway (the LTE 
Device). The gateway must be configured with information letting it know where to send the 
REGISTER message, as well as the relevant user and authorization data. 

A SIP registration has a limited lifespan. The User Agent Client must renew its registration within 
this lifespan. If it does not do so, the registration data will be deleted from the SIP registrar's 
database and the connection broken.

The LTE Device attempts to register all enabled subscriber ports when it is switched on. When you 
enable a subscriber port that was previously disabled, the LTE Device attempts to register the port 
immediately.

Authorization Requirements 

SIP registrations (and subsequent SIP requests) require a username and password for 
authorization. These credentials are validated via a challenge / response system using the HTTP 
digest mechanism (as detailed in RFC3261, "SIP: Session Initiation Protocol").

SIP Servers

SIP is a client-server protocol. A SIP client is an application program or device that sends SIP 
requests. A SIP server responds to the SIP requests. 

When you use SIP to make a VoIP call, it originates at a client and terminates at a server. A SIP 
client could be a computer or a SIP phone. One device can act as both a SIP client and a SIP server. 

SIP User Agent 

A SIP user agent can make and receive VoIP telephone calls. This means that SIP can be used for 
peer-to-peer communications even though it is a client-server protocol. In the following figure, 
either A or B can act as a SIP user agent client to initiate a call. A and B can also both act as a SIP 
user agent to receive the call.

Figure 76   

SIP User Agent

SIP Proxy Server

A SIP proxy server receives requests from clients and forwards them to another server.

In the following example, you want to use client device A to call someone who is using client device 
C. 

1

The client device (A in the figure) sends a call invitation to the SIP proxy server B.

A

B

Содержание B222s




































































































































































































































































Отзывы:

Нет отзывов