Huawei AR532 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 25

Huawei AR532 Скачать руководство пользователя страница 17

Huawei AR532 Router & AR-DCM-Pa
User Manual

2 Hardware Installation

Issue 01 (2016-09-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

11

2

Hardware Installation

About This Chapter

2.1 Preparations

2.2 Installing an AR532 Router

2.1 Preparations

2.1.1 Safety Precautions

Before you start the installation procedure, read all safety precautions described in this
document and observe any warning labels affixed to the equipment. Doing so will ensure your
safety and protect the equipment from damage.

Safety precautions provided in this document may not cover every eventuality, so remain
mindful of safety at all times.

Only trained and qualified personnel should be allowed to install, operate or maintain the
equipment.

General Safety Guidelines



Always take precautions against ESD whenever you handle the equipment. For example,
wear ESD gloves or an ESD wrist strap. To avoid electric shock or burn, remove
conductive objects like jewelry and watch.



After installing the equipment in a cabinet or rack, connect a ground cable to the
equipment. The ground cable must be connected first and disconnected last.

Environmental Safety

«
...
15
16
17
18
19
...
»

Содержание AR532


























Отзывы:

Нет отзывов