manualshive.com logo in svg

Huawei AR515 Series, Быстрый старт, Страница: 12 / 16

Поделиться
Скачать
Huawei AR515 Series Скачать руководство пользователя страница 12

11

Do not connect cables while the power is on.
Do not power on the router before you finish connecting and routing cables.

WARNING

For details about pin assignments and cable connections, see the 

Hardware Description

.

NOTE

Connecting the Router

In the vertical direction, categorize the cables into six groups based on the port positions, use 

cable ties to bundle the cables, and fix them on the holes for binding cables on the cable tray.

4

Use the paperboard to determine the position of the router on the luggage rack. Select four 

proper M4 pan head screws based on the thickness of the luggage rack, and use the Phillips 

screwdriver to tighten the screws from the back of the luggage rack to the four self-clinching nuts. 

After the installation, the end of each screw must be at least 2 mm higher than the corresponding 

self-clinching nut. 

6

Use the Phillips screwdriver to tighten the four M4x10 screws to install the waterproof cover on 

the cable tray. 

5

5.1 Connecting AR515GW-LM9-D

2 mm or longer

Содержание AR515 Series

















Отзывы:

Нет отзывов