manualshive.com logo in svg

Huawei AR150/200 Series, Руководство по настройке

Huawei AR150/200 Series - универсальные маршрутизаторы, обеспечивающие высокую производительность и надежную сетевую защиту. На нашем сайте вы можете скачать бесплатно Руководство по настройке для AR150/200 Series, чтобы оптимизировать работу вашей сети. Загрузите его с {сайт}.

Поделиться
Скачать
background image

                                                                                
Media policy type   :Unknown                                                    
Unknown Policy      :Yes                                                        
VLAN tagged         :No                                                         
Media policy VlanID           :0                                                
Media policy L2 priority      :0                                                
Media policy Dscp             :0                                                
                                                                                
Power Type               :Unknown                                               
PoE PSE power source     :Unknown                                               
Port PSE Priority        :Unknown                                               
Port Available power value:0                                                    
  ---- More 
----                                                                                   

Run the 

display lldp neighbor

 [ 

interface

 

interface-type

 

interface-number

 ] command. The

following information shows the LLDP status in the system and on the interface, device ID,
interface ID, device name, device description, management address, and aging time.

<Huawei> 

display lldp neighbor

Ethernet0/0/0 has 1 neighbors:                                     
                                                                                
Neighbor index : 1                                                              
Chassis type   :macAddress                                                      
Chassis ID     :00e0-11fc-1710                                                  
Port ID type   :interfaceName                                                   
Port ID        :Ethernet0/0/0                                            
Port description    :HUAWEI, AR Series, Interface     
System name         :Huawei  
System description  :Huawei AR200 Huawei Versatile Routing Platform Software  V
RP (R) software,Version 5.100 (AR200 V200R002C00) Copyright (C) 2000-2011 Huawei
 Technologies Co., Ltd      
System capabilities supported   :bridge                                         
System capabilities enabled     :bridge                                         
Management address type  :ipV4                                                  
Management address       : 127.0.0.1                                            
Expired time   :104s                                                            
                                                                                
                                                                                
Port VLAN ID(PVID)  :1                                                          
VLAN name of VLAN  1: VLAN1                                                     
Protocol identity   :STP RSTP/MSTP LACP GVRP                                    
                                                                                
Auto-negotiation supported    :Yes                                              
Auto-negotiation enabled      :Yes                                              
OperMau   :speed(100)/duplex(Full)                                             
                                                                                
Power port class         :PD                                                    
PSE power supported      :No                                                    
PSE power enabled        :No                                                    
PSE pairs control ability:No                                                    
Power pairs              :Signal                                               
Port power classification:Class3                                               
                                                                                
Link aggregation supported:Yes                                                  
Link aggregation enabled :No                                                    
Aggregation port ID      :0                                                     
Maximum frame Size       :1600                                                  
                                                                                
MED Device information                                                          
Device class   :Network Connectivity                                            
                                                                                
HardwareRev       :AR01SRU1A VER.A                                               
FirmwareRev       :128                                                            
SoftwareRev       :V200R002C00                                 
SerialNum         :NA                                                           
Manufacturer name :HUAWEI TECH CO., 
LTD                                                           
Model name        :NA                                                           
Asset tracking identifier :NA                                                   

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management

3 LLDP Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

73

Содержание AR150/200 Series



















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AR150/200 Series

Makita 3606 Parts Breakdown preview
3606
Бренд: Makita Страницы: 2
Wave wifi EC Series Quick Start Manual preview
EC Series
Бренд: Wave wifi Страницы: 2
Hama 53107 Operating Instruction preview
53107
Бренд: Hama Страницы: 10
XAVI Technologies Corp. 7721r User Manual preview
7721r
Бренд: XAVI Technologies Corp. Страницы: 71
ZyXEL Communications ZyXEL EES-1024AF User Manual preview
ZyXEL EES-1024AF
Бренд: ZyXEL Communications Страницы: 99
TRENDnet TW-200 Specifications preview
TW-200
Бренд: TRENDnet Страницы: 2
Netis DL4305 Quick Installation Manual preview
DL4305
Бренд: Netis Страницы: 16
Qlogic Storage Networking (Unified Fabric Pilot) Installation Manual preview
Storage Networking (Unified Fabric Pilot)
Бренд: Qlogic Страницы: 76
Enterasys Enterasys Matrix 2G4082-25 Hardware Installation Manual preview
Enterasys Matrix 2G4082-25
Бренд: Enterasys Страницы: 58
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Бренд: HGST Страницы: 36
Unex EVK-351 Quick Start Manual preview
EVK-351
Бренд: Unex Страницы: 27
Buffalo BS-GS2008P Quick Setup Manual preview
BS-GS2008P
Бренд: Buffalo Страницы: 2
TP-Link Archer MR600 User Manual preview
Archer MR600
Бренд: TP-Link Страницы: 113
VIA Technologies Mobile360 M810 Quick Start Manual preview
Mobile360 M810
Бренд: VIA Technologies Страницы: 25
Planet ADE-3110 User Manual preview
ADE-3110
Бренд: Planet Страницы: 66
Sharedband Power Router 2 Configuration Manual preview
Power Router 2
Бренд: Sharedband Страницы: 3
N-Tron 104TX Specification Sheet preview
104TX
Бренд: N-Tron Страницы: 2
ATEN Altusen SN0100 Series User Manual preview
Altusen SN0100 Series
Бренд: ATEN Страницы: 178

Бренды по названию

Популярные бренды

Загрузить еще бренды