Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual
3 Internet Access
27
User Name:
Enter the user name your ISP provides you.
Password:
Enter the password your ISP provides you.
Connect on
Demand:
It is a utility used to trigger the PPPoE session when there
is a packet being sent through the WAN port while it is on
disconnected situation. Check the radio button to make
this function active, and then you must enter the number
of minutes you wish the network to remain idle before
disconnection occurs in the
“
Max Idle Time
”
location.
Keep Alive:
This function keeps your PPPoE connection enabled even
if it remains idle. However, in some situation, PPPoE
session cannot be established immediately after
disconnection. This is because the system on the ISP
’
s
site may need a little time to restore itself. You may need
to check with your ISP to obtain details of how long you
need to wait before re-establish the PPPoE session. Enter
this information in the
“
Redial Period
”
field.
5.
PPPoA
(Point-to-Point Protocol over ATM)
Choose this setting according to your ISP used PPPoA as connection mode. You can
find more information on RFC 2684.
User
Name:
Enter the user name your ISP provides you.
Password:
Enter the password your ISP provides you.
Connect
on
Demand:
It is a utility used to trigger the PPPoA session when there is
a packet being sent through the WAN port while it is on
disconnected situation. Check the radio button to make this
function active, and then you must enter the number of
minutes you wish the network to remain idle before
disconnection occurs in the
“
Max Idle Time
”
location.
Keep Alive:
This function keeps your PPPoA connection enable even if
