IV. CONTROL PANEL:
1. Intelligent temperature regulator
2. Heating switch
3. Conveying switch
4. Electronic speed regulator
5. Hot wind switch II
6. master control switch
7. Heating master switch
8. cooling switch
V.
TEMPERATURE & TIME FOR SHRINK FILM:
Term
Film
Name Thickness (mm) Heating(S)
Shrinking room
temperature (
℃
)
Polyvinyl chloride
PVC
0.02~0.06
5~10
110~130
Polypropylene
PP
0.02~0.04
6~12
130~170
Polyethylene
PE
0.03~0.10
20~30
170~200
Polyethylene
PE
0.12~0.20
30~60
180~220
VI. OPERATION PROCEDURES & NOTICE:
1.
This machine is three phases with four pieces of power wires (380V), and thus in
addition to connecting to the three pieces of live wires, you should connect it to the
zero line as well.
2. Closing the master controlling switch (5) and master heating switch (7).
3. Closing the master controlling switch (5) and adjusting the conveying button (4)
4.
Pressing the heating switch (2), the machine starts to heat. The shrinking
temperature of PE film is generally set at 180~200
℃
, if you want to set the
temperature, please firstly press SET key, then press UP or DOWN key, and at last
press SET
key after your confirmation.
5. During the operation, if there are too many rumples, please decrease the conveying
speed of increase the heating temperature Whereas, if the shrinking film broken,
then please increase the conveying speed of decrease the heating temperature.
