11
indicates the machine is in the standby state and it can be used.
2. Standard Operation
Turn on the power switch to startup and the monitor shows “
□□
”.
Please adopt the composite bag suitable for vacuum packing and the bags should be
sterilized before packing foods.
Put the products in the bags. Choose the proper bags for the products. Don’t choose the
oversize bags. Ensure a clean environment during the operation. It is better that the
packing materials, products and the hands are dry.
Place the bag in the vacuum chamber or on the PP plate (if any). The bag mouth should
be placed on the heating plate or the silicon strip. If the bag is much lower than the
heating plate or the silicon strip, please insert the PP plate provided with the machine (if
any), which can make the operation simpler and the cycle time shorter.
Several bags can be placed simultaneously on the heating plate or the silicon strip, with
the precondition that the total length of these bag mouth do not exceed the length of
heating plate or the silicon strip. These bag should not be overlapped. If there’re several
heating plates or the silicon strips, they can be used simultaneously.
Set correct parameters for the vacuum and sealing function. Please refer to Control
Panel chapter.
Close the vacuum lid and the machine can automatically complete the whole set
program, including vacuuming, sealing and cooling. The vacuum lid will open
automatically when the last deflating finishes.
Remove the bags from the machine after the cycle is finished.
Press Emergency Stop Switch to stop the working if necessary, then the machine will
stop running, deflate immediately and the vacuum lid will open automatically.
Circulate as above.
Note: The vacuum lid can’t open automatically when there is power cut or other
accidents. The machine will execute the deflation function as soon as the
electricity is reconnected and then the vacuum lid will open automatically.
Note: If the machine operates in high altitude, the atmospheric pressure will decrease
and the value in the vacuum pressure gauge will reduce accordingly.
3. Optimal Packing
Employ good quality vacuum bag in correct style.
Leave enough space on the bag mouth, at least 30mm.
Place the vacuum bag neatly on the heating plate or the silicon strip.
If the bags are much lower than the heating plate or the silicon strip, please insert proper
PP plates (if any).
Содержание HVC-260T/1A
Страница 35: ...34 J Electric Circuit Diagram...
Страница 36: ...35 K Gas Circuit Diagram...