16
(see diagram 12), and then input the measured value “L” to the “cutting position”
parameter.
L
C o l o r m a r k
Diagram 12. Cutting position measuring
（
B
）
Counting
Follow the indication in the “main menu of the human-machine interface”
(diagram 7), press
（→）
key to enter the “counting” display, as shown in diagram 13.
E SC
A LM
S ET
E NT
0
5
6
7
8
9
+ / -
C L R
4
3
2
1
CLR
S h i f t o u t p u t ： ※ ※ ※ ※ ※ ※ ※ ※ ※ p
T o t a l o u t p u t ： ※ ※ ※ ※ ※ ※ ※ ※ ※ p
T o t a l t i m e ： ※ ※ ※ ※ ※ ※ ※ ※ ※ m i n
B a c k
R e s e t
ESC
Diagram 13. Yield counting display
17
This display mainly record the accumulated working time, accumulated output and
shift output, so as to facilitate production management for users. Shift output can be
reset by pressing
（
CLR
）
key. Press
（
ESC
）
key to return to the “main menu of the
human-machine interface” (diagram 7).
(C) Follow up method
Follow the indication in the “main menu of the human-machine interface”
(diagram 7), press
（↓）
key to enter into the “follow up method” display, as shown
in diagram 14. Press
（
ESC
）
key to return to the “main menu of the human-machine
interface” (diagram 7).
E SC
A LM
S ET
E NT
0
5
6
7
8
9
+ / -
C L R
4
3
2
1
ESC
B a c k
F o l l o w u p c u t t i n g
L e n g t h s e t c u t t i n g
Diagram 14. Follow up method display
Press
（←）
key, the machine will enter into “Follow up cutting” mode, Press
（→）
key, the machine will enter into “Length set cutting” mode. For packages with
color marks (i.e. for product to be followed up through color marks), “Follow up
cutting” is used; for packages without color marks, “Length set cutting” mode” is
used.
（
D
）
Inflating setting ( option)
Follow the indication in the “main menu of the human-machine interface”
(diagram 7), press
（↑）
key to enter into the “Inflating setting” display, as shown
in diagram 15. Press
（
ESC
）
key to return to the “main menu of the
human-machine interface” (diagram 7).
