Huahuan Electronics H0FL-EthMux.SA1601 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 55

Huahuan Electronics H0FL-EthMux.SA1601 Скачать руководство пользователя страница 35

Beijing Huahuan Electronics Co., Ltd.

H0FL-EthMux.SA1601/SA1602 User’s Manual V1.3

27

Tip: The sentence with underline is default setting.

5.4.2

Ethernet Senior Management

Ethernet senior management provides MAC address aging time, Ethernet

port QoS management and port rate control setting. MAC address aging time

range is 0~524287s (default: 300s), as shown in Figure 5.4-2.

Figure 5.4-2 Ethernet senior management

For Ethernet ports 1~5, we can enable QoS, QoS priority tags based on port,

IEEE 802.1p and TOS are supported. QoS is enabled by default.

Figure 5.4-3 Ethernet port QoS configuration (enabled by default)

Port rate control of Ethernet senior management includes enable Ethernet

port throughput limiting and speed configuration (supporting entry speed

limiting) and storm suppression, as shown in Figure 5.4-4. Speed class of

Ethernet interface is shown in Table 5.4-2. When we configure the maximum

port speed, if the value is not equal to any speed class in Table 5.4-2, it will

select the lower speed class proximal to this value. For example, value is set to

«
...
33
34
35
36
37
...
»

Содержание H0FL-EthMux.SA1601
























































Отзывы:

Нет отзывов