HTP MIG 200i, Руководство пользователя

Страница: 5 / 16

5
GENERAL CHARACTERISTICS
The MIG 200i features an incredible arc dynamic, which makes the MIG 200i suitable for any kind of wire and for
any material thickness from 26 gauge up to 1/4”. With the MIG 200i, you can weld in manual mode or in synergic
mode with Easy Set™ technology. The Easy Set feature makes set up a breeze by automatically setting your welder,
in a couple of simple steps, to the correct parameters. A simple polarity reversal allows you to weld with gas (solid
wire) or without gas (flux-cored wire). The MIG 200i also features manual wire feed, manual gas purge, and start
speed adjustment.
The HTP MIG 200i, which features electronic adjustments controlled by a microprocessor, allows you to achieve
excellent welding quality thanks to the advanced technologies applied. The microprocessor circuit controls and
optimizes arc transfer irrespective of the load variation and of the impedance of the welding cables. The inverter
technology used in the HTP MIG 200i, as well as other welding machines in our product line, enabled us to obtain the
following:
 Machines with extremely low weight and compact dimensions.
 Reduced energy consumption.

Excellent dynamic response.
 Very high power factor and yields.
 Better welding characteristics.
The sensitive electronic components are cooled with forced air by fans with low noise production, and the MIG 200i
features sophisticated, electronic overheat protection to prevent damage to your machine.
NOTE: The HTP MIG 200i is not suitable for thawing pipes.
The MIG 200i package includes:
 HTP MIG 200i Power Source
 10’ MIG Welding Gun

10’ Ground Cable and Clamp Assembly
 Flow Meter
 6’ Gas Hose

Owner’s Manual
NOTE: A 12’ or 15’ MIG welding gun may be purchased in place of, or in addition to, the 10’ MIG welding
gun.
Check that all of the material listed above is included in the package. Inform HTP America, Inc. if anything is
missing. Check that the machine has not been damaged in transit. If you see any sign(s) of damage, consult the
COMPLAINTS section for instr uctions. Befor e working with the machine, please r ead the entir e Owner ’s
Manual.
COMPLAINTS
Complaints for damage during transit: If your equipment is damaged during tr ansit, you must pr esent a claim
to the carrier.
Complaints for faulty goods: All equipment shipped by HTP America, Inc. is subjected to strict quality control.
However, if your equipment does not work properly, consult technical support at HTP America, Inc. as soon as
possible.