HTL DS Series, Руководство по эксплуатации

Страница: 6 / 32

OUTSIDE UK: +44 (0) 1670 700 018
5
• Hoses
Do not kink hoses. Inspect and replace if damaged.
• Shrouds and Cover Plates
All tools are equipped with shrouds and/or cover plates to cover up moving internal parts. If
shrouds are missing or damaged, please contact your local HTL representative for repair. A free
loaner tool will be made available to you during the time of repair.
• Maintain Tools With Care
For top performance, inspect tool powerpack, hoses, connectors, electric lines, and accessories
for visual damage frequently. Always follow instructions for proper tool and pump maintenance.
Refer to the operations maintenance section for further clarification.
• Stay Alert
Always take care. Do not use power equipment under the influence of any mood altering
substances.
• Prior to Operation
Ensure that all hydraulic connections are securely connected. Verify that the hydraulic hoses are
not kinked. Ensure the square drive and its retainer are fully and securely engaged.
• Prior to Use
Cycle tool to ensure proper function. Locate a solid, secure reaction point. Be sure the reaction
arm retaining clamp is fully engaged. Be sure the hydraulic hoses are free and clear of the reaction
point. Pressurise the system momentarily; if the tool tends to ride up or to creep, stop and
readjust the reaction arm to a more solid and secure position.
• Always Use Quality Accessories
Always use high quality impact sockets in good condition which are the correct size and fully
engage the nut. Hidden flaws, however, remain a possibility which could cause breakage, so stay
clear of sockets during operation.
• Do Not Use Force
Do not hammer on the socket or the tool to enhance performance. If the nut will not turn with the
wrench you are using, use a larger size HTL tool.
• Reaction Arm
Proper reaction is required. Adjust reaction arm or plate accordingly. Avoid excessive play. In case
of questions, consult with your HTL office.
HTL-Operating-Instructions-DS.indd 6 11/04/2017 10:15