EN - I
8
7.1
Changing a Programme
Follow the steps below to change a
programme while in operation.
Open the door and press the
Programme Selection button to
select a new programme.
After closing the door, the new
programme will resume the
course of the old programme.
NOTE:
Open the door slightly at first to
stop a programme before it is complete in
order to avoid water spillage.
7.2
Cancelling a Programme
Follow the steps below to cancel a
programme while in operation.
Press and hold the Programme
Selection button for 3 seconds. '1' will
be shown on the Display.
The water discharge process will start after the
door of the machine is closed and will continue
for 30 seconds. A buzzer will sound 5 times
when a programme is cancelled.
When the door of your machine
is opened, the most recently
selected programme will show on
the display.
Switching the Machine Off
"00" will be shown on the displaywhen a
programme is complete. A signal will also
sound 5 times. You can then switch your
machine off using the Power On/Off button.
Disconnect the plug and turn
off the water tap.
NOTE:
If any button is not pressed
on the ready state, the machine turns off
automatically after 15 minutes.
NOTE:
Do not open the door before a
programme is complete.
NOTE:
Leave the door slightly open at
the end of a wash programme to speed up
drying.
NOTE:
If the door of the machine
is opened or the power is cut during
operation, the program will continue when
the door is closed or the power returns.
Infoled 2.1 (Model Dependent)
LED Indicator
State of the Machine
Red, continuous
The machine is running a
program.
Red, flashing
A program is cancelled.
Red, flashing
rapidly
The machine has a fault. Refer
to section
"Automatic fault
warnings and what to do".
Green, continuous
A program is finished.
