15
How to Use
(CONT.)
Changing the Source Name on the KC7:
The KC7 keypad has the ability to display user-created names for each source on the LCD screen of each KC7 keypad.
These custom names must first be created within the HTD Valet Home Control app. If the names have not been created in the
Valet Home Control app or the user has chosen not to use the Valet Home Control app in conjunction with the KC7, then the
source names displayed on the KC7 will default to SRC1, SRC2, SRC3, etc.
Instructions on how to change the source names within the Valet Home Control app can be found within the Valet Operations
Manual (located on the HTD site or included with the purchase of your HTD Valet gateway). Or you can contact HTD at
info@
htd.com or toll free 1-866-HTD-AUDIO (483-2834)
and we will gladly walk you through the setup instructions.
Using the KC7 Keypad
Source Selection Buttons:
Select a source by pressing either of the two source buttons to navigate through sources.
The two source buttons navigate in opposite directions. One advancing to the next source the other reverting to the previ-
ous source.
Volume Control:
Press the volume up or volume down button to control the volume. You can press these buttons once for an incremental
increase or decrease, or press and hold the buttons down for continuous increase or decrease. There are 60 volume level
settings giving you the ability to find a perfect volume level at any time of day or night.
Power On/Off/Mute:
Press the power button once to turn the keypad on. Press it again to mute the sound in that zone. While muted, “MUTE”
will display on the KC7 screen. To un-mute, press the power button again or press either of the volume buttons. Note that
you may have to first wake up the keypad if it is in sleep mode by pressing any button.
Press and hold the power button for approximately 1 second to power off the keypad. If keypad is in “sleep” mode, it must
first be “awakened” to then power off. If volume is muted, the keypad can be powered off as normal with out being un-
muted.
Power ALL OFF:
It is possible to turn off every keypad connected to the controller by simply pressing the power button on any keypad and
holding it for approximately 3 seconds. Note that the keypad you are pressing will turn off after 1 second; continue holding
for an additional 2 seconds to turn off all zones.
Party Mode / ALL ON
At any time, it is possible to force all of the zones connected to the same controller to turn on with the same source se-
lected. When a keypad is powered on, simply press and hold the source button you want to hear for approximately 4 sec-
onds. All of the keypads, even those that were previously powered off, will begin playing the same source at the volume
level previously set on each keypad.
Once all of the keypads have been set, they are again immediately available for individual control, i.e. a keypad in any
zone continues to have control over its own zone so that a different source could be selected or that zone could be turned
off.
Using the Remote Control
(KC6 or KC7)
We provide a simple, credit-card sized infrared remote control for controlling the basic functionality of the keypad. Simply
point this remote control at any keypad to conveniently change sources, control volume, mute, or power on and off in that
zone.
Using Your Own Remote Control
(KC6 or KC7)
You may want to use your own universal or learning remote control to control the keypad functions as well as the functions
of the centralized components. To do this, you will need to purchase at least one of our remote controls and then follow the
instructions provided with your learning remote control to teach it to control volume, source selection, power, and mute.
Содержание MC-66 Multi-Zone
Страница 4: ...3 This Page is Intentionally Blank ...