HTD MC-66 Multi-Zone, Руководство пользователя, Страница: 13 / 20

How to Connect
(CONT.)
12
Tip : Many of our customers find it useful to buy a universal or learning remote control that can memorize the functionality of
all of the source components. Keeping one (or more) of these remote controls in a convenient location allows you to control
all of the source components by simply aiming the remote at any of the keypads located throughout the house.
Connecting IR Emitters to devices
Although the previous diagrams show the IR emitters placed near the devices that you wish to control, these diagrams are
meant to basically show how the emitters/receiving eyes fit into your whole-house audio setup.
The emitters are packaged along with double-sided tape which allow the emitters to attach directly to the devices you wish to
control. These emitters should be placed directly onto the IR receiving eye of the devices. Figure 7 shows specifically where
these IR emitters should be placed.
The IR emitters shown have a flash-back feature built into the device to visually signal when a command has been “passed
through” the system. This flash-back indicator is located on the top side of the emitter. The actual emitting eye within the
emitter is located on the bottom portion of the emitter. This is why the emitters should be attached on top of the device’s
receiving eye that you wish to control.
FUSE T1A/250V
AC 120V~60Hz
Power Consumption: 70W
IR OUT IR IN
SOURCE INPUT
RS232 INTERFACE
KEYPAD PORTS
1 2 3 4 5 6
L
R
4 3
2 1
5 6
12V/DC
TRIGGER
OUT IN
L R
PRE OUT
ZONE1
FIXED VARIABLE
L R
PRE OUT
ZONE2
FIXED VARIABLE
L R
PRE OUT
ZONE3
FIXED VARIABLE
L R
PRE OUT
ZONE4
FIXED VARIABLE
L R
PRE OUT
ZONE5
FIXED VARIABLE
L R
PRE OUT
ZONE6
FIXED VARIABLE
Home Entertainment Cabinet
Making use of Infrared Capability
Using IR Emitter(s)
Using the IR Receiver Eye (optional)
Connect Emitters to the Emitter Outputs on the back of the
controller. Place each IR Emitter directly on top of the audio
component’s infrared eye. (see the component’s owner’s
manual to determine this location).
Connect the IR Receiver Eye to the IR Receiver input on
the back of the controller. Position the Receiver Eye outside
of your cabinet or closet in a position where it can detect
your IR remote. It is only necessary when you don’t have a
keypad located nearby.
Zone 1-6 Equipment Room
RC6
Your own
remote
control
Your own
remote
control
(IR Receiving Eye, Emitters, Keypad and RC6 remote are sold separately)
Figure 8
MUTE
HTD Whole-House
Audio Controller
HTD 12-Channel
Amplifier
CD/DVD Player
Sat Rcvr
Tuner