Reattaching the front and back pads to the headset
Always make sure that the front and back pads are attached to the headset.
1.
While holding the visor with one hand, pull up the band.
2.
Starting from the middle, align the front pad tabs with their corresponding slots on the
band, and then press along the front pad. You may need to gently bend the ends of the
front pad to align the outermost tabs with the slots on the band.
Make sure to minimize the gap between the pad and the band and that all tabs are fully
locked into place.
3.
Align the back pad tabs with their corresponding slots on the band, and then press along
the back pad to reattach.
16
Headset and headphones
HTC PROPRIETARY & CONFIDENTIAL. DO NOT DUPLICATE OR DISTRIBUTE WITHOUT PERMISSION.
HTC CONFIDENTIAL to FCC